Learn these four tricks to easily solve the problem of radial runout of CNC Router tools

In the production process of panel furniture, if the CNC Router fails, it will have a great impact on the quality of the workpiece processed by the Router. At this time, a certain method needs to be used to solve this problem, so everyone knows how to Is it easier to solve the problem of the radial jump of the Router tool? Next, Blue Elephant CNC will summarize this problem in detail for everyone.

In the process of CNC machining, there are many factors that affect the machining quality of the workpiece. The radial runout of the tool will cause the bending deformation and machining vibration of the workpiece, so this is one of the factors affecting the machining quality of the workpiece.

Use a high-strength tool and choose a larger rake angle and relief angle of the tool, which can improve the sharpness of the tool, reduce the friction of the elastic recovery layer on the transition surface between the tool and the workpiece, and reduce the cutting force and vibration of the tool. However, too large rake angle and rake angle will reduce the strength of the tool, which is not conducive to heat dissipation.

Use a sharp tool. The sharp tool of the CNC Routerhas less cutting force for the overall processing, so the radial cutting force on the tool is small, which can reduce the radial runout of the tool.

The rake face of the tool should be smooth, so that the friction of chips on the tool can be reduced during processing, and the cutting force on the tool can also be reduced, thereby reducing the radial runout of the tool.

Rational use of cutting fluid. The cutting fluid with cooling effect has little effect on the cutting force, while the cutting oil with lubricating effect can significantly reduce the cutting force. Due to its lubricating effect, it reduces the friction between the rake face and the chip and between the rake face and the transition surface of the workpiece, thereby reducing the radial runout of the tool.

Regarding the four methods for solving the radial runout problem of the CNC Router tool, the above content has been introduced. I believe that after reading it, you will have a new understanding and understanding of this. Among them, the use of strong and sharp tools and tools The rake face should be smooth and the cutting fluid should be used reasonably. These four aspects are relatively important factors. Don’t ignore them. If you want to know more, you can pay more attention to our website, hoping to help everyone.

Leave a Reply

Your email address will not be published.