Non-porous process CNC Router
It can not only process the installation slots required for various invisible links, but also process the installation holes of common two-in-one and three-in-one connectors for panel furniture, which can quickly drill, slot and cut.
- 1.The non-porous process CNC cutting machine adopts a special saw blade spindle with good stability.
- 2.12 in-line tool changing, saving tool changing time and high efficiency.
- 3.Vacuum adsorption table, the table uses embedded parts to facilitate the replacement of the liner, no more scraping and gluing, which improves the accuracy of the table, and can prevent the air between areas and air leakage, and improve the adsorption effect.
- 4.XY axis Taiwan helical rack and pinion Z axis adopts Taiwan TBI ball screw, with high precision and durability.
- 5.This machine is mainly used for the manufacture and production of panel furniture. It can process not only the installation slots required for various invisible links, but also the installation holes for common two-in-one and three-in-one connectors of panel furniture. Slots and cutting blanks.
- 6.Equipped with high-power tool changing spindle, large-capacity servo tool magazine, and special device for sawing, milling and grooving, it is suitable for diversified and complex product processing or various processing procedures. Engraving, etc.; easy to operate, especially suitable for customized production needs.
|Product name and model
|Non-porous process CNC Router
|new generation system
|Jester air-cooled spindle straight row 12 knives plus Jester saw blade spindle
|11kw Hepmond Inverter 1.5KW Hepmond Inverter
|Motors and Drives
|New Generation Servo
|Full-page vacuum suction table (7 zones)
|side panel type
|New welded column
|Taiwan Taiwan stable Y axis 30 square rail X, Z axis 25 square rail
|Vacuum Pump Voltage and Frequency
|Water circulation vacuum pump 380V, 3ph50Hz
|Vacuum cleaner voltage and frequency
|Double Bag Vacuum Cleaner 380V, 3ph, 50Hz
|automatic tool setting