Fully automatic double trimming edge banding machine with profiling tracking
The function of the edge banding machine: gluing and welting → front and rear alignment → rough trimming → fine trimming → tracking trimming → scraping edge → polishing.
Function of edge banding machine: gluing and welting → front and rear alignment → rough trimming → fine trimming → tracking trimming → scraping edge → polishing.
1. Glue and seal the edge: the air cylinder controls the opening and closing of the glue door (WSN cylinder and billion-day solenoid valve), the glue quantity is stable, and the thickness is uniform.
2. Front and rear: Cut off the excess edge banding at both ends of the plate (WSM cylinder with 2 pressure regulating valves and 1 pressure relief valve), the air pressure is more stable, and the end is more stable.
3. Rough trimming: A six-edged alloy flat knife trims off the excess edges.
4. Refinement: The six-blade R knife trims off the excess edge banding strips to form rounded corners, making the trimming more beautiful.
5. Copy tracking: The four corners after edge sealing are trimmed into small arcs to be more smooth and not irritating. The self-designed tracking action and air path design make the copying and chamfering action more stable.
6. Scraping the edge: the super hard alloy R knife scrapes the fine lines of the edge banding to make it smooth.
7. Polishing: The cloth wheel quickly polishes and polishes the edge of the edge band, making it smoother and more beautiful.
|PLC programmer||Taiwan Delta|
|Low voltage electrical appliances||Korea LS Power Generation|
|Temperature table||Korea Autonics|
|Limit switch||Korea Kaikun|
|Pneumatic Components||100 million days, WSN|
|Gear reducer||Taiwan Shengbang|
|high speed motor||UFC|
There are no reviews yet.